In consumer electronics, power management often faces the dual challenges of space and power consumption. Ruimeng Technology introduces the MSG2915: a low on-resistance single-channel load switch. Featuring a miniaturized package, ultra-low on-resistance, 6 μA quiescent power consumption, and a controlled slew rate, this IC supports a wide input voltage of 1.5 V to 5.5 V, creating an efficient and safe power path for battery-powered devices.

Core Highlights

01 Low Resistance and High Efficiency, Supports High-Current Output

The IC integrates a low on-resistance switch (typical value only 64 mΩ @ 3.3 V) and supports a maximum continuous switch current of up to 1.5 A. It effectively reduces voltage drop and conduction loss under high-current loads, improving the overall system power efficiency.

02 Ultimate Low Power Consumption, Extends Battery Life

With excellent power consumption control, the quiescent operating current is as low as 6 μA (@ 3.3 V), and the shutdown current is as low as 0.22 μA. It consumes almost no power in standby or sleep mode, significantly extending the battery life of portable devices.

03 Controlled Slew Rate and Fast Discharge

Smooth Power-up: At a 3.3 V input, the rise time is controlled at 79 μs, effectively limiting the transient high current when the capacitive load is powered on, preventing the previous-stage power supply from being pulled down.

Active Discharge: The built-in fast discharge function can discharge the output capacitor in just 2 μs when turned off, eliminating residual voltage and preventing malfunction of the downstream circuit.

04 Minimal External Components and Highly Compatible Logic

Supports a wide input voltage range of 1.5 V to 5.5 V. The ON control pin is compatible with a very low threshold (down to 1.2 V) and can directly connect to the GPIO of a low-voltage MCU. It uses an extremely small DFN4 package, greatly saving PCB area.

Technical Specifications

Key Parameter Performance Specification
Switch Type SPST
On-Resistance (Typ) (Ω) 0.064 @ 3.3 V
Operating Voltage Range (V) 1.5 - 5.5
Quiescent Current (Typ) (μA) 6 @ 3.3 V
Function Low On-Resistance Load Switch
Package DFN4

Application Scenarios

Consumer Electronics

For consumer electronics constrained by both space and power consumption, the MSG2915 provides a minimalist power management solution: the small DFN4 package saves space; the 6 μA ultra-low quiescent current (0.22 μA in shutdown) ensures battery life; the 79 μs controlled rise time prevents power supply droop; and the 2 μs fast discharge prevents residual voltage, comprehensively ensuring system stability.

With its low resistance, low power consumption, and comprehensive protection features, the MSG2915 provides an efficient and reliable load switch solution for consumer electronics.